How To Maintain Your Home's Water Pressure

22 August 2018
 Categories: , Blog


Water pressure is a prevalent problem that many plumbers deal with. If you have a water pressure problem in your home, the first thing you need to do is to consult a plumber. Mostly, plumbers usually issue recommendations like using a water pressure gauge to determine the static water pressure and advice on how to solve the problem. So, how do you determine the water pressure in your home?

Use a Water Pressure Gauge

Mostly, a pressure gauge comes with a gauge and a normal hookup, which you can attach to a hosepipe or standard faucet. The test the water pressure in your home, just connect the gauge to a faucet and then allow water to run through the faucet. This will help you in determining the water pressure in your entire home. However, if you live in a multistory building, you will realize that you have different water pressure levels on each floor. Typically, the pressure is higher on the ground floor and continues to reduce with as you go up.

When measuring the water pressure in your home, it is important to understand the appropriate water pressure. So, what the appropriate levels of water pressure? The water pressure in your home should range between 50 - 70 psi. Most plumbing appliances in your home can withstand water pressure of up to 80 psi, which means that anything above that can damage your appliances. But, if the water pressure is below 50 psi, then you might start experiencing inadequate water flow in your home.

Solving the High Water Pressure Problem

If you notice that the water pressure in your home is too high, you can reduce the water pressure by adjusting the pressure-reducing valve (PRV). The PRV is mostly located close to the shut-off point of your main water supply. If your home doesn't have a PRV, you should have fixed as it helps in maintaining your home's water pressure.

Solving the Reduced Water Pressure Problem

In case there is low water pressure in your home, you need to contact your water supplier to check whether there are any issues with the water pressure. If the problem is coming from your water supplier, then you need to invest in a booster pump as it helps in improving water pressure. However, if there is no problem with your water supplier, then the problem might be within your plumbing system. Crimps, leaks, or blockages can reduce the water pressure in your home. If that's the case, you will need to contact a plumber to assist you in solving the problem. Plumbing leak detection services are a first step to help you locate and eliminate water leaks.